Fishing trailers & Rolling-up equipment
67 Item(s)
Fixing Screws Wire Guide Seanox For Winding - 10x45 mm
Fixing screw for thread guide for SEANOX reel.
$6.44
Fixing Screws Wire Guide Seanox For Winding - 10x50 mm
Fixing screw for thread guide for SEANOX reel.
$6.44
Uni Line Release Clamp Cannon
The Uni-Line Release Cannon is easy to use with one hand and releases the trolling line from the downrigger when a fish is caught.
$24.86
Pliers Cannon Pinch-R-Release
Very easy to use by simply pressing on the ends and used for fishing with a winch (or downrigger). The release tension is adjustable between 1 and 5,4 kg depending on the position of the line in the jaws.
$24.86
Permanent Cannon hull pass-through kit for electric winch socket - white
Easy winch installation. Protective cap. Perfect finish. Colour white
$25.99
Permanent Cannon hull pass-through kit for electric winch socket - Black
Flush electrical outlet.
$25.99
Pliers Cannon Quick Stacker
Same characteristics as the Quick release clamp but it is installed directly on the winch cable to fish at different depths using only one Weight.
$25.99
Downrigger clamp Cannon Uni-Stacker Release
The Uni-Stacker Cannon is quick and easy to use. It avoids winding or twisting of the line which could damage it. The tension can be adjusted by means of a knob.
$28.25
Pliers Cannon Quick Release
Cannon clip for trolling. Even in a bouncing boat, this clamp is quick and easy to use and prevents the line from wrapping or twisting leading to damage.
$28.25
Pliers Cannon Offshore Saltwater Line Release
Adjustable tension release clamp specially adapted for sea fishing at great depths and high trolling speeds.
$33.90
Pliers Cannon Offshore Release
Adjustable tension release clamp for trolling (downrigger). Easy to use, even in extreme conditions, this clamp does not damage the line as it avoids twisting and winding movements.
$33.90
Single Cannon plastic rod holder
3-position rod holder for a rod equipped with spinning or casting. The base plate can be rotated 360°.
$36.33
Pliers Cannon Offshore Stacker
Adjustable tension release clamps. Same features as the Offshore release, with a second clamp allowing fishing at different depths with a single Weight.
$39.55
Kit Cannon of 6 clips for fixing the Weight
Cannon kit of 6 clips for fixing the Weight at the end of the cable
$45.20
Mounting base Cannon in Lexan for Uni Troll
Cannon winch mounting system. For Cannon electric winches, this sturdy base is made of 316?
$48.59
FishingWeight Downrigger Cannon - 4 Pounds (1.8 kg)
The weights fishing downrigger Cannon are profiled to slide more easily in the water. These weights are used to lower the fishing line more or less deeply while controlling its deployment with the Cannon winch. Specially designed for fishing in the water.
$62.16
Mounting base Cannon in Lexan for Easi Troll
Winch fastening system. Quick release base plate
$62.16
Fixed Rod Door Cannon for rail mounting
Cane holder oriented at 60º and with a 90º rotation angle on each side.
$91.54
FishingWeight Downrigger Cannon - 10 Pounds (4.5 kg)
The weights fishing lines for winch or downrigger Cannon are profiled to slide more easily in the water. These weights are used to lower the fishing line more or less deeply while controlling its deployment with the Cannon winch. Specially designed for fishing in the water.
$100.58
FishingWeight Downrigger Cannon - 12 Pounds (5.4 kg)
The weights fishing lines for winch or downrigger Cannon are profiled to slide more easily in the water. These weights are used to lower the fishing line more or less deeply while controlling its deployment with the Cannon winch. Specially designed for fishing in the water.
$118.66
$123.18
Support Cannon for fixing on the edge or handrail
Reinforcement for installation on the gunwale rail, made of rilsanised aluminium
$118.66
Mounting Bracket Cannon 30 cm in Lexan
The Lexan support for Cannon fishing winches is designed to mount a winch in a Rod carrier inclined at 30°.
$129.96
Mounting Bracket Cannon 23 cm in Lexan
The Lexan support for Cannon fishing winches is designed to mount a winch in a Rod carrier inclined at 30°.
$129.96
Swivel base Cannon Lexan for all models
The Lexan Cannon Swivel Base is a system that fits into an existing Rod bracket to secure the winch.
$152.56
Rod doorCannon hinged on 1 axis for fixing on a rail
Made of hardened aluminium. Can be handled and turned with one hand thanks to the handle system that can be pressed to tilt the stand back and forth
$154.82
Downrigger Cannon Mini-Troll
Fixing on the edge - 30m of stainless steel cable & counter at the foot
$163.86
Rod holderCannon hinged on 2 axes for fixing on a rail
Made of hardened aluminium. Can be handled and oriented with one hand thanks to the handle system that you just have to press
$183.08
$186.47
67 Item(s)
3D secure 
Visa Mastercard 
Wire transfer 
